Jones Ultra Stratos Split

Stiff

Directional Rocker: A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rocketed tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rocketed tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Splitboard (standard)

Directional

FSC™ Fusion Core: The new Fusion Core is Jones’ lightest wood core yet. Core is made from mostly paulownia with specifically positioned pockets of poplar for improved durability and response.

Koroyd® Core: Developed from aerospace safety, Koroyd® was inspired by the fact that cylindrical tubes were found to absorb the most amount of energy when force is applied. When integrated to the Jones Aviator’s nose, Koroyd® gives the board three performance advantage: vibration reduction, lower swing weight and a light but solid feel.

Fusion Carbon Construction: Multiple layers of aerospace grade carbon fiber are fused with the wood core and pressed with as little epoxy as possible. Fusion Carbon construction produces the most damp, durable and responsive board from Jones’ lineup.

Fiberglass Reinforcement: Fiberglass layer improve pop in nose and tail plus increases the longevity of the flex profile. This lightweight layer helps the board perform the same on day 100 as it did on day one - precise and playful.

Ultra Base: New Jones exclusive base material that sets new performance standards. Lab results and snow testing show 25% better wax absorption, better glide in warm/wet snow and better durability for grinding.

3D Contour Base 3.0: Freeride focused 3D-base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

In. & Out. Traction Tech: Like serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running legit of your board. The Traction Tech on the inner-edge improves splitboard edge grip on ascent to keep you locked in on icy skin tracks.
Progressive Sidecut: At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Textured Eco-Plastic Topsheet: Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight, chip/scratch resistant and water/snow repellent.

Recycled Rounded ABS: New rounded sidewall finish that improves board durability by protecting topsheet from chipping.

Quick Tension Tail: Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.

Boltless Bridge: Eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.

Stainless Steel Reinforcement: Stainless steel plates are embedded into the nose and tail for improves board tip durability.

Karakoram Ultra Clip: ULTRA clips are lower profile, stronger and increase compression between board halves.

New Karakoram Tip-Lock Tip Clips: Using Active Joining Technology, the Karakoram Tip-Lock Tip Clips quickly lock and clamp the tips of your splitboard with the flick of the lever.

Bio Resin: All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy.

Wend Natural Wax: Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

3 years